The use of Bricks or Pavers to produce a pathway or patio area complements a home in a method that is unmatched. In addition, installing a Brick or Paver sidewalk does not necessarily require a pro.
The key to installing a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be set up. The location should be dug out at least a foot down, eliminating all topsoil and clay soil. In addition, string lines ought to be strung on each side of the pathway. The string lines indicate the completed height of the walkway.
As soon as the area has been dug, 3/4" gravel stone ought to be laid in and tamped down securely. 2" of sand, or stone dust must be spread out over the gravel. Once again the sand/stone dust need to be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline should equate to the density of the brick or paver.
Now that you have a stable base, put a 1" pipeline or ledger board the length of the pathway on either side of the walkway. Using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level surface area to lay the bricks/pavers.
Now put on the level sand/stone dust strips of plastic brick borders. Install a work on both sides of the prepared location. These strips will function as your walkway border and assistance to maintain the stability and shape of the walkway. You can get these plastic strip borders at most house enhancement stores. The strips need to be anchored down with 12" galvinized nails. You need to sink these nails into the ground and through the strips every foot.
You can then start to lay the bricks/pavers as soon as this is done. There are numerous patterns you can lay. I especially like the Herring Bone pattern. The secret to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again assist preserve the integrity of the walkway.
Inevitably bricks/pavers will need to be cut or split when building the sidewalk. To really cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the area where you more info want to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.
After setting up the bricks, develop the outside edges with extra sand, and after that shovel in the topsoil and load down firmly.
Lastly, spread stone dust over the new pathway and sweep into the cracks. Repeat this process a number of times to guarantee the fractures are completely filled. This will finish the interlocking of the bricks and assist to get rid of any weed development. Just include grass seed to the outside edges and you should have a lovely entryway to your home within a number of weeks.
In addition, more info installing a Brick or Paver pathway does not necessarily require a pro. The key to setting up a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be set up. Now that you have a steady base, put a 1" pipeline or ledger board the length of the pathway on either side of the sidewalk. These strips will act as your pathway border and assistance to preserve the integrity and shape of the walkway. Undoubtedly bricks/pavers will require to be cut or divided when developing the walkway.